# Simulation of a Steady-State Binary Distillation Column

Requires a Wolfram Notebook System

Interact on desktop, mobile and cloud with the free Wolfram Player or other Wolfram Language products.

Consider an ideal equimolar binary mixture of benzene and toluene at . This mixture, with a thermal quality equal to 0.5, is fed to a 10-stage column with a total condenser and partial reboiler. The feed stage is stage 7. The feed flow rate is taken equal to . You can set the values of the reflux ratio and reboil ratio . This Demonstration computes the temperature and composition profiles using a rigorous approach, which includes both energy and mass balances. It is clear that the numerical simulation gives data similar to the graphical method developed by Ponchon–Savarit. The molar flow rate profiles for both the liquid and vapor phases are also displayed. A separate calculation showed that, for and , stage 7 is the optimal feed location. Indeed, if one changes the feed location while keeping the same values for and , the cooling and heating duties will be higher. The simulation finds cooling and heating duties equal to and , respectively, for and . All results found in this Demonstration show perfect agreement with those given by HYSYS (http://www.aspentech.com/hysys/).

Contributed by: Housam Binous (October 2010)

Open content licensed under CC BY-NC-SA

## Snapshots

## Details

detailSectionParagraph## Permanent Citation

"Simulation of a Steady-State Binary Distillation Column"

http://demonstrations.wolfram.com/SimulationOfASteadyStateBinaryDistillationColumn/

Wolfram Demonstrations Project

Published: October 29 2010